if you are interested in it , Get free samples :sales@edabearings.com

Bearing selection is a compulsory task for motor designers. Proper selection of bearings can effectively guarantee motor performance, otherwise it can only grow in constant failure. Well-known bearing manufacturers will work hard on the introduction of bearings to help bearing users customize the most suitable bearings. Ms. refers to the bearing samples from different manufacturers, each of which has its own merits. Now, the content information of bearing selection through static load capacity is basically summarized and shared with you.

When to Select Bearings by Rating Load

In some cases, the bearing size should be selected by rated static load (for convenience of description, code C0) instead of calculating the bearing life.
Under the action of continuous or intermittent impact load, the bearing is stationary.
Under the action of load, bearings only move slowly to and fro or adjust.
Under the action of load, the bearing's speed is very low (less than 10 revolutions per minute) and only needs a very short life. In particular, in this case, for a given equivalent load P, the required basic rated dynamic load C will be very low according to the life formula, so the selected bearings may be seriously overloaded in practical work.
In addition to the normal working load, it also bears a heavy impact load, bearing is rotating.

---

PREVIOUS:Whose fault is the crack of bearing inner ring?        NEXT:Making Engine Bearings with Ceramics